تقویت کننده موبایل خانگی Promotion WCDMA 2100MHz 3G Repeater Mobile Signal Booster (GCPR-W20) : رد استار تل ، تقویت آنتن دهی موبایل

رد استار تل ، تقویت آنتن دهی موبایل

فروش دستگاه تقویت کننده و مسدود کننده موبایل

Product Details

Basic Info.

Model NO.:GCPR-W20
Type:Signal Repeater
Transmission Medium:Cable
Standard:Standard
Lightning Protection:With Lightning Protection
Certification:ISO, RoHS, CE
Condition:New
Installation Type:Indoor, Small Size
Technic Advantage:Alc&Agc
Certificate:CE ISO RoHS
Noise Figure:Less Than 6db
Automatic Level Control:More Than 15db,Auto Shut off 31db After 15db
Gain Flatness:Less Than 6db(P-P)
Standard1:GSM Meet Etsi Ts 151 026 V6.1.0
Impedance:50 Ohm
Power Supply:Input AC90~264V,Output DC5V / 2A
Environment Conditions:IP40
Export Markets:Global

Additional Info.

Trademark:Gainer
Packing:Packing in Resistant Paper Cartons
Standard:CE ROHS ISO
Origin:Shenzhen, China
HS Code:854370920
Production Capacity:5000 Unites/Month

Product Description

Promotion WCDMA 2100MHz 3G Repeater Mobile Signal Booster (GCPR-W20)
Promotion WCDMA 2100MHz 3G Repeater Mobile Signal Booster (GCPR-W20)
Promotion WCDMA 2100MHz 3G Repeater Mobile Signal Booster (GCPR-W20)Output power is related with the coverage area. Theoretically speaking, in the standard situation (input –60dBm, surrounding no obstacle and proper install):
10dBm can cover 100-200 square meter,
15dBm can cover  200-500 square meter,
20dBm can cover 800-1200square meter,
23dBm can cover  1200-1500square meter,
25dBm can cover  1500-1800square meters.
27dBm can cover  1800-2000square meter,
30dBm can cover  3000-5000square meters.
33dBm can cover  5000-10000square meters.

Features:
1.  Elegant and Compact design
2.  Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3.  15dB MGC(Manual gain control) 5dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4.  Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5.  Low power consumption – 6W only.
Electrical specification Uplink Downlink
Frequency Range CDMA800 824 ~ 849 MHz 869 ~ 894 MHz
CDMA1900 1850 ~ 1910 MHz 1930 ~ 1990 MHz
GSM850 824 ~ 849 MHz 869 ~ 894 MHz
GSM 890 ~ 915 MHz 935 ~ 960 MHz
DCS 1710 ~ 1785 MHz 1805 ~ 1880 MHz
PCS 1850 ~ 1910 MHz 1930 ~ 1990 MHz
WCDMA 1920 ~ 1980 MHz 2110 ~ 2170 MHz
AWS 1710 ~ 1755 MHz 2110 ~ 2155 MHz
LTE 700 MHz( A, B, C, D band optional)
2500 ~ 2550 MHz 2620 ~ 2670 MHz
Max .Gain ≥ 65dB ≥ 70dB
Max .Output Power ≥ 15dBm ≥ 20dBm
Band width (-3dB) Wide Band
MGC ( Step Attenuation ) ≥ 15dB / 5dB step
Automatic Level Control ≥ 15dB,auto shut off 31dB after 15dB
Gain Flatness ≤6dB(P-P)
Noise Figure ≤6dB
VSWR ≤1.8
Group Delay ≤5μs
Frequency stability ≤0.01ppm
Spurious Emission &                                                   Output inter-modulation GSM Meet ETSI TS 151 026 V6.1.0
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
CDMA Meet IS95 & CDMA2000
LED Alarm Standard
Power LED Green light when power on.
ALC LED Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB,
LED off after 5 second red color
Mechanical Specifications Standard
I /O Port N-Female
Impedance 50 ohm
Operating Temperature -25ºC~+55ºC
Environment Conditions IP40
Dimensions 176x100x44mm
Weight ≤ 2Kg
Power Supply Input AC90~264V,output DC5V / 2A

Standard Package:
1) Power supply adapter 1 unit
2) AC power plug (USA/EU/Swiss/UK/SA/China standard etc) 1unit
3) Installation kit 1unit
4) User manual 1unit

Recommended Accessories:
1)Donor(outdoor) antenna:Patch Antenna(8.5dBi 806-960/1710-2700MHz)
2)Service(indoor) antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3)2*10m of 50Ω-5 coaxial cable with 2 connecters.Or 2*15m of 50Ω-5 coaxial cable with 2 connecters.

1.1. RF technical specification

Electrical specification Uplink Downlink
Frequency Range CDMA 824 ~ 849 MHz 869 ~ 894 MHz
GSM900&EGSM 880 ~ 915 MHz 925 ~ 960 MHz
DCS 1710 ~ 1785 MHz 1805 ~ 1880 MHz
PCS 1850 ~ 1910 MHz 1930 ~ 1990 MHz
WCDMA 1920 ~ 1980 MHz 2110 ~ 2170 MHz
AWS 1710 ~ 1755 MHz 2110 ~ 2155 MHz
GSM850 824 ~ 849 MHz 869 ~ 894 MHz
CDMA1900 1850 ~ 1910 MHz 1930 ~ 1990 MHz
Max. Gain 10dBm >=60dB >=65dB
15dBm >=65dB >=65dB
20dBm >=70dB >=70dB
23dBm >=70dB >=75dB
27dBm >=75dB >=80dB
30dBm >=80dB >=80dB
Max. Output power 10dBm >=10dBm >=10dBm
15dBm >=12dBm >=15dBm
20dBm >=15dBm >=20dBm
23dBm >=15dBm >=23dBm
27dBm >=20dBm >=27dBm
30dBm >=20dBm >=30dBm
Band width (-3dB) Wide Band
MGC (Step Attenuation) >=31dB / 1dB step
Automatic Level Control >=15dB auto shut off after 15dB (Optional)
Spurious Emission 9KHz~1GHz <=-36dBm @ 3KHz
1GHz~12.75GHz <=-30dBm @ 3KHz
Noise Figure <=6dB
VSWR <=2.0
Group Delay <=1.5μs
LED Alarm Standard
LED Alarm LED 1 Power Indicator
LED 2 (ALC 1~5dB,Grange;ALC 15~20dB,Red, then shut off automatically)

1.2. Mechanical specification

SN Item specification
1 Environment Conditions IP40
2 Cooling mode Nature cooling

1.3. Environment Conditions

SN Item specification
1 Operating Temperature -25°C to +55°C
2 Storage Temperature -40°C to +80°C
3 Humidity 5% to 85%

1.4. Requirements for adapters

SN Item Minimum Typical value Maximum
1 Input Voltage Range 90 V 220 V 264 V
2 Output Voltage Range 47 Hz 50Hz 63 Hz

2. Installation

The repeaters should be used to cover the indoor area. Humidity and temperature of working environment can affect the reliability of repeater. So, temperature, humidity, dust, interference, power, space requirements and other factors should be considered during installation of repeater.

2.1.  Installation Location Requirement

1) It is appreciated that the repeater is installed in a cool, dry and ventilated room without erosive gas and smoke and without leakage on its proof.
2) Or a cool and ventilated wall of which sun-proof and waterproof is expected.
3) Besides above, common wall, tower or high pole is Ok too.
4) Installation height should be easy for RF cable wiring, heat dissipation, security and maintenance.
5) Have a set of independent and stable power supply.
6) Have lightning conductor in the building, tower or high pole with enough strength or stability.

2.2. Power requirement

Generally it is AC power supply, and the requirement of AC is 90~264VAC / 50±5Hz

2.3. Installation tools and accessory

No. Name Specification Quantity Remark
1 Plastic Expansion Bolt M5*24 6 Standard accessories
2 Tapping screw M3*27 4 Standard accessories
3 Hanging folder 1 Standard accessories
4 reciprocating drill 1 Engineering-owned, punch the wall
5 Shot bit M3 1 Engineering-owned, punch the wall

1.1.1. Manual Gain Control (MGC)

Switches 1-5 represent Downlink and 6-10 represent Uplink. When it is necessary to adjust the gain by DIP switch, firstly please adjust Downlink gain according to input signals, secondly please adjust Uplink gain according to Downlink gain.

The DIP Switches have default ‘OFF’ status; please push relevant switches to “ON” position if certain attenuation value needs to be achieved.

l DIP switch downlink attenuation setting:

Att 1 2 3 4 5 Att. 1 2 3 4 5 Att. 1 2 3 4 5
0 dB off off off off off 11dB ON ON off ON off 22dB off ON ON off ON
1 dB ON off off off off 12dB off off ON ON off 23dB ON ON ON off ON
2 dB off ON off off off 13dB ON off ON ON off 24dB off off off ON ON
3 dB ON ON off off off 14dB off ON ON ON off 25dB ON off off ON ON
4 dB off off ON off off 15dB ON ON ON ON off 26dB off ON off ON ON
5 dB ON off ON off off 16dB off off off off ON 27dB ON ON off ON ON
6 dB off ON ON off off 17dB ON off off off ON 28dB off off ON ON ON
7 dB ON ON ON off off 18dB off ON off off ON 29dB ON off ON ON ON
8 dB off off off ON off 19dB ON ON off off ON 30dB off ON ON ON ON
9 dB ON off off ON off 20dB off off ON off ON 31dB ON ON ON ON ON
10 dB off ON off ON off 21dB ON off ON off ON

l DIP switch uplink attenuation setting:

Att 6 7 8 9 10 Att. 6 7 8 9 10 Att. 6 7 8 9 10
0 dB off off off off off 11dB ON ON off ON off 22dB off ON ON off ON
1 dB ON off off off off 12dB off off ON ON off 23dB ON ON ON off ON
2 dB off ON off off off 13dB ON off ON ON off 24dB off off off ON ON
3 dB ON ON off off off 14dB off ON ON ON off 25dB ON off off ON ON
4 dB off off ON off off 15dB ON ON ON ON off 26dB off ON off ON ON
5 dB ON off ON off off 16dB off off off off ON 27dB ON ON off ON ON
6 dB off ON ON off off 17dB ON off off off ON 28dB off off ON ON ON
7 dB ON ON ON off off 18dB off ON off off ON 29dB ON off ON ON ON
8 dB off off off ON off 19dB ON ON off off ON 30dB off ON ON ON ON
9 dB ON off off ON off 20dB off off ON off ON 31dB ON ON ON ON ON
10 dB off ON off ON off 21dB ON off ON off ON

About us
Gainer International (China) Limited is a professional enterprise which specialized in signal repeater, signal booster, signal amplifier. We are highly developing enterprise, with CE certificate and GB/T19001-2008 /ISO 9001:2008. We spare no effort to provide high quality products and good service for customers all over the world.

We mainly produce signal repeater, booster of EGSM / GSM / LTE / DCS / CDMA / WCDMA / CDMA450M / IDEN / TETRA, also other correlative products such as antennas, cable, splitter, coupler, combiner.We manufacture products by our own R&D team which was formed by experienced exports in related fields. Our design and manufacture can follow customers’ special requirements.

We believe “Quality-oriented , Customer is god, Service first” ,dedicate to provide the most satisfactory services for our customer. We aim to provide more competitive products and meet the needs of high-speed developing market.Cooperate with Gainer China, you will be the Gainer of the world, we are waiting for you!

ديدگاه خود را بيان کنيد